stupified

[hydra]

I'm with you SLCTECH. I have 4 of these!

[drife678]

Brilliant

[AYservicetech]

Brilliant

X2

Ill be adding these to my arsenal

[slctech]

You know I started with these, but there are so many times I couldn't connect to a system for what ever reason because of the stubby solid connection, that is why I dumped the fitting and added a the hose instead.

I'm with you SLCTECH. I have 4 of these!

[Sicofthis]

I use my digicool ak900. have hoses with ball valves. after i take my readings i close the ball valves, remove both hoses from ports and hook liquid line hose to suction valve and suck it back in. on PM's my company says check temp split. i have seen plenty of units with good deltas but overcharged, undercharged, bad txvs, etc.....

Do you purge the liquid hose with the suction before you hook up?

[hydra]

You know I started with these, but there are so many times I couldn't connect to a system for what ever reason because of the stubby solid connection, that is why I dumped the fitting and added a the hose instead.

I gotcha. I'm using them on flexible service valves for refrigeration so I'm able to bend them a little as necessary.

[jayguy]

...Gauge does upto 800psi so covers the spectrum of 99% of what I would attach it to...

what are you working on 1% of the time where the pressure is over 800 psig?

[slctech]

what are you working on 1% of the time where the pressure is over 800 psig?

CNG compressors, I have been servicing and maintaining numerous CNG compression equipment for years. From residential FuelMaker systems to Gas Station rack systems.....3000psi plus...so this could count as my 1%

[jayguy]

CNG compressors, I have been servicing and maintaining numerous CNG compression equipment for years. From residential FuelMaker systems to Gas Station rack systems.....3000psi plus...so this could count as my 1%

that would do it.