Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2007
    Location
    N.E. KS
    Posts
    717

    Vulcan 7680-AB Combo Griddle/Oven question.

    First of all, I hope that is all of the model number.

    Second, can anyone tell me how they hold up the griddle portion of the unit? I have a set of these that are made as one on a steel frame, and one of the griddles is tilting towards the back corner opposite the drain corner. I think the hood cleaners must of stood on it. I am going to take off the front burner cover at 2:00 today when it is cool and see if there is anything obvious that is bent. I measured the suspect corner and it is lower than the respective corner of it's mate.

    I researched the vulcan website and didn't find any manuals for this unit and have not heard back from tech support. Any help appreciated.

    Thanks, mdharris68
    Some people know the cost of everything but the value of nothing.

  2. #2
    Join Date
    Jan 2007
    Location
    N.E. KS
    Posts
    717
    Well if anyone runs into one of these, with the same issue, just look down through the back where the leveling screws are and adjust accordingly.
    Some people know the cost of everything but the value of nothing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event