digicool ak900 manifold problem
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2005
    Location
    iowa
    Posts
    1,649

    digicool ak900 manifold problem

    I need some help guys. I've got a problem with the manifold that came with my ak900. The low side valve will not open. What I mean is the valve and handle will turn but I can't Blow thru the manifold... its like its plugged. I took the knob off and then the brass peice with the o ring on it. I turned the valve that is in the manifold but this doesn't seem to make a diiferance either.

    Any ideas? I hope this makes sense.

    Jeep

  2. #2
    Join Date
    Dec 2006
    Location
    Goodyear, AZ
    Posts
    196
    Call Brenda at Digi-Cool 866-551-2665

    RDHolder

  3. #3
    Join Date
    Aug 2005
    Location
    iowa
    Posts
    1,649
    Thanks for the # rd. I ended looking at the manifold again today. The plugs that thread into the ends of the manifolds were in to far. This apparently valves off the ballvalves?! Kinda odd. But once I backed them out all is well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event