Results 1 to 3 of 3
Thread: digicool ak900 manifold problem
09-26-2012, 12:54 PM #1
digicool ak900 manifold problem
I need some help guys. I've got a problem with the manifold that came with my ak900. The low side valve will not open. What I mean is the valve and handle will turn but I can't Blow thru the manifold... its like its plugged. I took the knob off and then the brass peice with the o ring on it. I turned the valve that is in the manifold but this doesn't seem to make a diiferance either.
Any ideas? I hope this makes sense.
Jeepgeez!!! the more i learn the more i know i need to learn!!
09-29-2012, 03:56 PM #2
Call Brenda at Digi-Cool 866-551-2665
09-30-2012, 01:05 PM #3
Thanks for the # rd. I ended looking at the manifold again today. The plugs that thread into the ends of the manifolds were in to far. This apparently valves off the ballvalves?! Kinda odd. But once I backed them out all is well.