Results 1 to 5 of 5
09-24-2012, 02:24 AM #1
Bad allergy need help on how to reduce
Mold is high on allergen count
What is the best way to help reduce that indoor?
Also mountain cedar is around the corner. When that is high, I usually suffer the most
How can I reduce that.
Will UV help with mold allergen?
How about mountain cedar?
Any help is appreciated
09-29-2012, 01:22 PM #2
Please don't respond all the same time
I have aboUt 2 pages of things I'm allergic to
Buch of diff pollen
Especially mountain cedar
I'm not up to date with all these Uv light
So learn me about air quality
I'm a good listener and great student.
IM DYING Y'ALL .
10-03-2012, 09:34 PM #3Regular Guest
- Join Date
- Aug 2012
- NE wisconsin
What are you currently doing to clean the air? Is it an older home, fresh air intake on the duct work or an energy recovery ventilation system? UV light alone probably won't fix the problem. For severe cases it usually takes a combination of better filtration both on the air handler and on fresh air intake, UV and ozone light, and if mold is the issue possiblely dehumidifier. It's kinda hard to make recommendations from the other side of the country not knowing what exactly the whole picture is, might do well to get a consultation from your favorite local HVAC tech. Good luck any more questions just ask.
10-05-2012, 12:48 AM #4
lennox pure air will help..... trane also has a good one.... there are manyit was working.... played with it.... now its broke.... whats the going hourly rate for HVAC repair
10-05-2012, 01:53 AM #5
Air seal the house, 4-5" media filter, run low fan 24/7, run house positive pressure...Which makes more sense to you?
CONSERVATION - turning your thermostat back and being uncomfortable. Maybe saving 5-10%
ENERGY EFFICIENCY - leaving your thermostat where everyone is comfortable. Saving 30-70%
DO THE NUMBERS! Step on a HOMESCALE.
What is comfort? Well, it AIN'T just TEMPERATURE!
Energy Obese? An audit is the next step - go to BPI.org, or RESNET, and find an auditor near you.