Results 1 to 7 of 7
  1. #1
    Join Date
    Sep 2012
    Location
    Columbus, Ohio
    Posts
    2

    SIT 820 Nova mV Gas Valves -- Models?

    Good morning,

    Can someone point me to reference material that will show/describe/list the differences between different SIT 820 Nova mV series gas valves?

    For example, there are 0.820.633, 0.820.634, 0.820.652, and so on. I've not found anything that explains the differences. I've checked the manufacturer's website and only found general information on the series.

    Thanks,
    Jason

  2. #2
    Join Date
    Nov 2009
    Location
    Simcoe, ON Canada
    Posts
    43
    I've tried to find out this also. No-one will tell use the specs of the different models. Best bet is to make your own cross reference chart. Majestic and Napoleon and Regency use the same valves in some of their models.

  3. #3
    Join Date
    Aug 2004
    Location
    S.E. Pa
    Posts
    6,142
    SIT publishes this info on a valve spec sheet. It denotes various dropout rates at specific milliamp draws. Contact SIT Controls USA

  4. #4
    Join Date
    Nov 2009
    Location
    Simcoe, ON Canada
    Posts
    43
    Thanks, I will check that out.

  5. #5
    Join Date
    Sep 2012
    Location
    Columbus, Ohio
    Posts
    2
    Quote Originally Posted by hearthman View Post
    SIT publishes this info on a valve spec sheet. It denotes various dropout rates at specific milliamp draws. Contact SIT Controls USA
    I tried, but I didn't have good contact info. I couldn't ever get a call or email back from anyone I tried. I did a lot of googling and finally found a guide that gave all the specifications for each model of a series.

  6. #6
    Join Date
    Jun 2011
    Location
    Fresno, CA
    Posts
    197
    hook up the specs lakee911, I tried to get more info as well but came up short I have however got some info from a dexen gas valve company they were pretty cool about emailing info, just trying to compile as much info on gas valve trouble shooting as possible. Have a cool one.

  7. #7
    Join Date
    Nov 2009
    Location
    Simcoe, ON Canada
    Posts
    43
    Found a document that gives some specs. PM me if you would like me to email you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event