Results 1 to 1 of 1
09-18-2012, 09:32 AM #1
Carrier 3V / System pilot to Tridium
Today I looked at a Carrier VVT 3V system which a tenant had installed in a building, now the tenant is gone and the building management want this VVT system added to the base building BAS. So the system is 12 zones being fed by a carrier RTU with Comfortlink controls....so I see everything is networked using CCN. Would I have any problem pulling the CCN into a Jace? I wouldn't want to break any "linkages" or bindings between the VVT controllers and the RTU. How messy would scheduling be? Anyone that is familiar with these 3V 's and could offer advise, please do.