Intelipak Remote pot.
Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2005
    Posts
    1,347

    Intelipak Remote pot.

    Does anybody know what the ohms value Trane likes for the remote economizer minimum position. I think it is TB-14 terminal 8 and 9, but the 135ohm kele control that is hooked up has no effect on the position. Is is programming or the wrong ohm value? Any advice?
    I STARTED WITH NOTHING, AND I STILL HAVE MOST OF IT!

  2. #2
    Join Date
    Aug 2006
    Location
    Mixing oil and fire with a big spoon.
    Posts
    4,215
    i don't believe that there is a TB14...i guessed at one of the 78,474 different model numbers that make up Intellipaks but then I gave up.
    You either love bacon or you are wrong.

    4 gallons of gas, 2 miles of travel, teaching my daughters how to drive in the high school parking lot...priceless!

  3. #3
    Join Date
    Jun 2006
    Location
    New Jersey
    Posts
    4,325
    I believe it's 270ohm. Also, you need to set the default OA min position setpoint source to remote pot. It's under setpoints>setpoint source.

  4. #4
    Join Date
    Nov 2005
    Posts
    1,347
    I will give it a try. I am tempted to purchase the remote pot from Trane just to see what the ohm value is.
    I STARTED WITH NOTHING, AND I STILL HAVE MOST OF IT!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event