Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2008
    Posts
    30

    cleaver brooks cb 100

    i have a cb 100 cleaver brooks boiler its a low pressure hot water boiler just curious what should the oil pressure be i normally work on high pressure #6 boilers so i have a little knowledge about this i am being told 10 different things i believe it should be around 45# it is #2 oil thanks

  2. #2
    Join Date
    Mar 2003
    Posts
    7,323
    depends on how it was originally specified/setup, but usually 35 is a better starting point, with a ten psid on the return loop. adjust from there.

  3. #3
    Join Date
    Feb 2008
    Posts
    30
    thanks flange i have alot of work to do to this boiler it has been down for 3 years any other suggestions ?? air adjustments ect thanks again

  4. #4
    Join Date
    Mar 2003
    Posts
    7,323
    wither google or get the manuals somewhere. usually you can find them online easily, something like this. http://www.google.com/url?sa=t&rct=j...N3wSXTCsNAfv5Q

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event