Little announcement here on a change of policy we just had. Previously we were not to release any drivers or programs to WebCTRL techs for the SiteLink-E, which caused problems for some sites that were doing this with our older SiteLink 2mb module.*
We now have an IGM driver for the SiteLink-E along with a library of programs and graphics for our equipment that we are allowed to release to WebCTRL techs.*
Some things to note:
-Startup on the SiteLink by Liebert must be performed, we also make sure the equipment we are talking to is set up right to talk to the SiteLink.
-We will give you the equipment program and graphic bezel for the equipment that is on site.
-We still aren't allowed to work on the WebCTRL system.*