Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2002
    Location
    ON., Canada
    Posts
    192

    Hussman CHR-5 Reach In Freezer

    I was wondering if anybody had any info on this old 5 glass door reach in as far as what the original defrost heater was like, including location. The current one looks like its only 2 passes and is just shoved in under the evaporator coil. Thanks for any replies.

  2. #2
    Join Date
    May 2011
    Posts
    54
    What is the problem you are having? Heater no good? I think it's the correct heater but I'm sure you can find it on their website.

  3. #3
    Join Date
    Dec 2002
    Location
    ON., Canada
    Posts
    192
    Drain pan heater isn't working and needs replacing. I always thought that the defrost heaters were located on the face of the evap coil, not underneath it.

  4. #4
    Join Date
    Sep 2008
    Location
    Western PA
    Posts
    24,995
    Quote Originally Posted by shipwreck View Post
    Drain pan heater isn't working and needs replacing. I always thought that the defrost heaters were located on the face of the evap coil, not underneath it.

    I've seen them under the coil as well.

    Hussmann did it and Hill Phoenix did it. Kysor/Warren, too, IIRC.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event