Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2012
    Central Illinois
    Post Likes

    Alarm Text Messaging setup to Cell Phone or email using Trane Tracer Summit V17

    I just acquired a new site that has Trane Tracer Summit v17. The current building operator does not receive any alarms and does not know when something is in alarm until he goes to his workstation and see's the ALARM flashing. I would like some assistance as to how to set up point alarming as text to a cell phone or via email. I would then like to place the point in alarm and then test the alarm to my cell phone.

  2. #2
    Join Date
    Jul 2001
    Post Likes
    it's not hard, but there are a lot of steps and more than i want to type. All the manuals are on the C drive under the Tracer Summit folder. The manuals should walk you through basic alarming
    Saving the service call at a time.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.