Who's work is it?
Hey guys & gals. Not trying to start a fight but this has always been an argument on job sites. Wiring of WI freezers. I see it alot, especially on schools. Electricians claim its their work and hit the floor kicking and screaming if a fitter or sheetmetal worker starts to do it. Then when we let them have it or if they already have it in their SOW they can't figure out how to wire it and we end up doing it anyway. Question: should they claim work they cannot do?
They like it because they get paid to watch you do it.
back charge them for fixing their F/U, then inform them it's coming out of their wages
their arrogant attitudes won't let them acknowledge they don't have a friggen' clue what they are doing.
It`s better to be silent and thought the fool; than speak and remove all doubt.
I normally quote doing the control wiring. If the electrician ends up doing it, I will give him the number and gauge of the conductors and tell him I will do the termination.
"The best preparation for good work tomorrow is to do good work today"
This is how our jobs typically go.
Originally Posted by smurphy
Get the wires to the unit and label them. I'll do the rest.
If they insist, I'll let them do it, but the smart electricians only insist once.
Got frustrated last time it happened. He threw a fit, I called the shop, they said let him do it, I left. 2 hrs later shop sent me back to show him where to land wires. I went back handed him the wiring diagram and left agin. Ended up wiring myself the next morning. Freaking douche bag. I offered to land them for him initially but was told "no that's our work. We better do it." couple hrs later he was so confused he couldn't climb a ladder and wanted my help. I don't have a problem helping anyone and usually offer but these freaks will file a grievance and or flop around like 3 year olds kicking and screaming and run you off. Then either call you back when their brain melts or just put wires any where and let the smoke out of the thing at first defrost cycle. Wish they would just pull the wire and go away.
Originally Posted by Joehvac25
That's about all there good for is pulling wire. Some are smart though, our sparky used to wire those up now we didn't do work like that anymore.
I really enjoyed watching a panel full of soft starts,controls and transformers go up once ....
Pull the wire and let a tech land it or let the tech assist...and not be a jackass about it ...
I came across a voyager once that a couple of sparkies fixed,,,ripped all the controls out and wired up a conventional stat to it ...made me sad...
They couldn't figure it out so they killed it ...
Just because it has wires doesn't make you automatically qualified to touch it.
Sparky does the work. We fix it.
Officially, Down for the count
YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET
I know enough to know, I don't know enough
Liberalism-Ideas so good they mandate them
tell him to wire it from the panel to where it should be and specify that they pull the power wire from the panel to unit only, makes the panel connection and leave the breaker off/lock it off. and you do the final connection on the unit and any control wiring required. they'll be happy that way.
Parts Changer Extraordinaire
Have tools and gauges, will travel.
RIDGID|YELLOW JACKET|UEI|TESTO|STANLEY|CPS|VETO| KLEIN|MILWAUKEE|MASTERCRAFT|
Depends on the electrician. Ive seen a few who had obviously wired many walk ins. Ive seen more who didnt have a clue.
Simply hide the schematic until they come sniffling and saying please help us!
I think I'd like to tell them to bite me. Get the wires to my boxes and let us do the rest. I get really tired of coming in after the fact and separating the lights, door heat, and evaporator fans off one circuit. I will not work in the dark!!! Is it that hard to wire me in a disconnect or a switch?!