I have had a new system installed and just got curious about model numbers, compatibility and exactly what the numbers mean. For instance I know the 36 in the compressor indicates it is a 3 ton unit. I have two matching systems for my house.
We live in TX and have propane for heat.
I have a TUD2C080A9V4VBA (XV-80) furnace with 4TTR5036E100AC (XR-15) compressor and a 4TXCC060BC3HCBA Coil.
Did the contractor match up appropriate units? I guess I expected the coil to have a 36 in the code somewhere to go with the 3 ton compressor.
The systems are in the attic - horizontal flow. I think they may have bent one of the units. It is nearly impossible to put the door that opens to show the dip switches and circuit board back on (I'm talking a major struggle). Like the unit is sagging/bent in the middle. What would most of you say if a customer pointed that out and insisted it be fixed?
Thank you for any inputs/feedback...