Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2011
    Location
    Fogelsville, Pa.
    Posts
    117

    How to reset error code on Trane sensor/control BAYSENS119A

    Im getting error e1 e2 on the sensor. How do I reset it. I tried turning thr rtu off and on and nothing. Could not find any info on net. I know what the error codes are but dont know how to reset on sensor/control. Thanks If you have a link to this info that would be great.

  2. #2
    Join Date
    Jun 2006
    Location
    New Jersey
    Posts
    4,340
    So you know what caused the heat and cool failure. And you fixed it. And it still won't reset?

    What was wrong with the unit to trigger the failure?

    It could be a few things.......but most common is open, shorted or failed outdoor sensor.

  3. #3
    Join Date
    Feb 2011
    Location
    Fogelsville, Pa.
    Posts
    117
    I found a wire plug off of the board. Solved. Thx anyway

  4. #4
    Join Date
    Jun 2006
    Location
    midwest
    Posts
    126
    hold the self terst button in on the bottom of the sensor for 2-3 secs. t i think this action resets the sensor.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event