Results 1 to 2 of 2
-
08-25-2012, 11:11 PM #1
Regular Guest
- Join Date
- Sep 2009
- Location
- Miami, FL
- Posts
- 299
PL-DLXPT Torch Kit Swirl ....Good or Bad setup for newbie?
http://victortechnologies.com/turbot...odID=0386-1397
What you guys think about this setup? It seems super compact and lightweight. I am thinking between this setup or a VICTOR TURBOTORCH TDLX2010B setup or a LENOX LX514B MODEL 21837LX514B.
https://www.thermadyne.com/turbotorc...odID=0386-0578
http://www.amazon.com/Lenox-LX514B-A.../dp/B001HWASFM
They all are around the same price 220-230ish.
-
08-25-2012, 11:28 PM #2
Professional Member
- Join Date
- Jul 2007
- Location
- Chicagoland
- Posts
- 468
It looks like the Victor is only mapp and LP, with that you cant braze much over 3/8 copper. I struggled through a season with an acetylene Turbo torch once and hated it, very loud and poor heat control. My advise would be to spend a little more and go Oxy/acetylene. With a little practice you'll get a better result and spend a lot less time keeping things from burning up.
Reply With Quote