Results 1 to 2 of 2
  1. #1
    Join Date
    May 2006
    Location
    Amory Mississippi
    Posts
    998

    hoshi DCM270BAH wiring question

    I pulled out the gear motor/evaporator assembly to clean and rebuild it. The wiring diagram was hard to read so I thought I would be clever. I cut the wires at the connectors leave short stubs of color so I would know which wires connect to each other. The gear motor has 4 wires coming out. The guys in the shop reorganized the workbench for me and I found 3 of the factory connectors. orange and yellow, red and grey, black and violet. The only other wire I cut was the neutral where it comes through the strain relief and did not cut the black. Based on the wiring diagram it looks like the blue should connect the the neutral (white).

    Can anyone confirm this or tell me otherwise? there is a place in hell for people who mess with the work area when you have something torn down....

  2. #2
    Join Date
    Dec 2009
    Posts
    147
    Call Permul at 1 800 567 4432
    this isnt tech support but they will give you a number to call
    best of luck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event