Page 2 of 2 FirstFirst 12
Results 14 to 17 of 17
  1. #14
    Join Date
    Nov 2007
    Location
    Mississippi
    Posts
    1,274
    If the drier is in between liquid line shut off and condenser outlet, when system is pumped down there will be pressure on drier. This would be ok if there was a factory installed schreader inside condenser. You could shut off isolation valves and pump over with recovery machine.

  2. #15
    Join Date
    Sep 2002
    Location
    Virginia
    Posts
    3,070
    if its heatpump you can shove the gas into the AH unit if you know what im sayin ....

  3. #16
    Join Date
    Dec 2009
    Location
    Upstate, South Carolina
    Posts
    98
    can you put two biflow driers on a system will it hurt anything

  4. #17
    Join Date
    Sep 2002
    Location
    Virginia
    Posts
    3,070
    wont hurt anything , but theres no real benefit either

    its only going to act as one big dryer , because inbetween them will never get dirty

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image