Results 1 to 3 of 3
  1. 08-11-2012, 11:32 AM #1
    Dilp172
    Dilp172 is offline Professional Member
    Join Date
    Oct 2010
    Posts
    100

    XL15C and command display

    Have a job that the command display is linked to xl15c, but what would seem relavent setpoints like changeover/room setpoint arent programmed (stuff is standalone).The command display is only showing status/room temps etc.Is there a way to create setpoints in the display and map them to the xl15.
    Thanks
    Reply With Quote Reply With Quote
  2. 08-12-2012, 08:19 AM #2
    mechmike2
    mechmike2 is offline Professional Member
    Join Date
    Dec 2006
    Location
    Boston area
    Posts
    159
    No you need to use a configuration tool, Lonspec, to configure command display. You can download it free off Honeywell Buildings Forum but you will need a Lon adapter for your PC.
    Reply With Quote Reply With Quote
  3. 08-13-2012, 12:21 PM #3
    skwsproul's Avatar
    skwsproul
    skwsproul is offline Professional Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    1,378
    Quote Originally Posted by mechmike2 View Post
    No you need to use a configuration tool, Lonspec, to configure command display. You can download it free off Honeywell Buildings Forum but you will need a Lon adapter for your PC.
    Exactly. I wouldnt attempt it if you are unfamiliar with the workings of lonspec unless you have some time to learn it. Its not a complicated program but you wouldnt want to mess the site up either.
    Build it and it will break. Fix it and it will work. Ignore it and will cost more. Patch it and it will get worse. Cross the bridge before the flood.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules