vacum setup

[mr_guy]

2 Valve core removal tools, 2 half inch hoses one on each side of system, and directly teed to vacuum pump and with a micron instrument. Nothing too spectacular just good old fashioned evacuatin'

Sent from my Nexus 5 using Tapatalk

[KevinAdv]

My vacuum pump has 1 1/4 and 1 3/8 port is there any reason I couldn't use this instead of the $65 dollar tee yellow jacket has

http://www.sears.com/lasco-plumbing-...SPM10753062719

[Utahjohn]

i dont see why not i am going to a tee with 2- 3/8 flare tee that will go directly into my pump. at the moment i have a 1/2 to 3/8 reducer on my new JB 7cfm