Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2010
    Posts
    121

    XL15C and command display

    Have a job that the command display is linked to xl15c, but what would seem relavent setpoints like changeover/room setpoint arent programmed (stuff is standalone).The command display is only showing status/room temps etc.Is there a way to create setpoints in the display and map them to the xl15.
    Thanks

  2. #2
    Join Date
    Dec 2006
    Location
    Boston area
    Posts
    246
    No you need to use a configuration tool, Lonspec, to configure command display. You can download it free off Honeywell Buildings Forum but you will need a Lon adapter for your PC.

  3. #3
    Join Date
    Jan 2005
    Location
    USA
    Posts
    1,460
    Quote Originally Posted by mechmike2 View Post
    No you need to use a configuration tool, Lonspec, to configure command display. You can download it free off Honeywell Buildings Forum but you will need a Lon adapter for your PC.
    Exactly. I wouldnt attempt it if you are unfamiliar with the workings of lonspec unless you have some time to learn it. Its not a complicated program but you wouldnt want to mess the site up either.
    "It's always controls"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event