Hi, I have install lonwatcher 3 to my PC,DEMO mode. i am trying to connect to my excisting network EBI HONEYWELL desktop LNS database . i have PCC-10 or lightweight client ???? thankyou
From memory PCC-10 means the LON FT-10 2 wire connection is coming direct to your laptop.
Lightweight client means the LNS server resides somewhere other than your laptop. Which since you said desktop I assume the LNS server resides on your desktop so you would be in the lightweight client mode.
"How it can be considered "Open" is beyond me. Calling it "voyeur-ed" would be more accurate." pka LeroyMac, SkyIsBlue, fka Freddy-B, Mongo, IndyBlue
BIG Government = More Dependents
"Any 'standard' would be great if it didn't get bastardised by corporate self interest." MatrixTransform
- not my website.
Versatile Hunting Dog Federation - www.vhdf.org/
For lightweight client you will need to set your pc up as a 852 nic in the lonworks interfaces and then register your pc's IP in the LNS server pc in the echelon lns utilities. (C/Lonwork/bin/Insereg.exe)
But I'm not sure if lonwatcher will let you connect to an existing DB in demo mode.
Thankyou 381 ENGINEER and CRAB MASTER. Itried pcc 10 but i can't connect to the channel,with PROTOCOL ANALYZER lon scanner i can connect to the channel.What is the diference , do i need to register the honeywell PLUG-IN to lonwatcher , how can i import the database from destop to PC if i have to .About lightweight im tryng to connect and dhe message came up ''subsystem LNS 108 ? THANKYOU AGAIN
Hi im looking for lonmaker demo Can sameone help me
Originally Posted by milan13