New Drill

[CE-TECH]

Hey guys,
I am looking at getting a new drill. I already run a DeWalt XRP 18V for anything major. I am looking to get something small that will easily fit in my Veto Pro Pac to take up on a roof to remove panels and such.

I have looked at the Milwakee M12 set and I do like the size.

Does anyone have any recommendations about anything out there? I would like to hear good and bad reviews.

Thanks

[Freightshaker]

Company started switching us to the small Bosch impactors. Those things are slick. Good power, battery, and light for roof traveling. Many of the guys were using a 36 volt for service work. Our purchasing guy got them for a deal but they are too big!! They were dubbed the nuclear drills and most were traded in for the impactors. Downside is: they are not fans of the cold keep the batteries warm. They lose charge quickly. Also new stuff is not as aquatic as the old!

[hearthman]

Rigid battery powered right angle tool kit. You can interchange impact, drill, hammer, or multi-tool heads with same power pack. You'll love having a right angle drive.

[gmb]

The Milwaukee m12 set are great. I keep the impact one in my bag, it's small and has lots of power for its size

[NY2GA01]

The Milwaukee m12 set are great. I keep the impact one in my bag, it's small and has lots of power for its size

I love my Milwaukee m 18 set. I got it on sale for 199.99

http://www.homedepot.com/h_d1/N-5yc1...&storeId=10051

[Random]

I love my Milwaukee m 18 set. I got it on sale for 199.99

http://www.homedepot.com/h_d1/N-5yc1...&storeId=10051

I've got the larger set, with Sawzall and flashlight. It's awesome. The impact never leaves my side. The sawzall and hammer drill are fantastic for installs and plumbing work. Surprisingly, the flashlight is pretty useful too.

[Deadshort]

Good information here. I use a Dewalt 12v Max in my tool bag, but I am in need of upgrading my bigger drills/drivers. That Makita sounds nice and there is a promotion going on.

http://www.makita.com/en-us/Modules/...BareTools2012/

I've never been much for the cordless saws, but you can bet I've never turned one down when I'm too far away from power. That might be an option there as well.............There I go rambling I know a few guys who use the Bosch, Milwaukee and Hitachi 12 volt drivers. They all seem to like them. The 12v Max is just what I picked up. I like it.

[turkey]

I recently switched to makita 18v small , lite , and more then enough power and the battery last forever on the little impact brushless motors are a plus as well

[ga-hvac-tech]

I still have the Dewalt 7.2V power screwdriver in my VETO, along with a spare battery. More than adequate for cabinet screws. For 'real' work, I have the black/white Makita LiOn 18V pair. The B&W pair are lighter (easier on my older wrists), and have plenty of power to do basic things. Once in a while, I get out the old NiCad DeWalt 18V... and be careful with my wrists. Any major work (like boring a hole in a brick or block wall for a PVC pipe), out comes the Makita hammer-drill which is corded.

[Blows_Sucks_Heats_Cools]

I really like the Makita 12 volt impact for panel work, nice and small, power for days...just get off the trigger after the first couple of taps going back in.

[mofotech]

How about this. Price is good. Don't know if the size of the drill is good enough for you.

http://slickdeals.net/permadeal/7800...bo-kit-lct209w

[ga-hvac-tech]

How about this. Price is good. Don't know if the size of the drill is good enough for you.

http://slickdeals.net/permadeal/7800...bo-kit-lct209w

I have not seen that set at HD... did not know it was made. I like the 18V B&W Makita's... all the drill I need for most HVAC work. The one in your link may be a nice replacement for that DeWalt 7.2 screwdriver I have now... would be smaller and lighter... and the batt would probably last longer. The drill may not get much use, but for $90 bucks it is a buy.

[Joehvac25]

I love my Makita 18v cordless combo kit, I think the guy who stole the first one out of my van liked his too lol. It has drill, impact, Sawzall, skillsaw, and flashlight. Impacts are great for service, screws that a drill will snap an impact takes them out easy.