Results 1 to 5 of 5
  1. #1

    Old Pneumatic VAV Box (Varitrane HRB08MXG): Need IOM, cut-sheets, submittals, etc

    I am new (both to posting and to this site) so please bare with me. The lab has some very old pneumatic Trane VAV controllers. The tag says use document VAV-IN-5 for calibration instructions but we haven't been able to locate any except for VAV-IN-1 I found in another thread. The box shown in the VAV-IN-1 is similar but a bit different.

    I tried to find this VAV-IN-5 on the internet and at Trane's website but no dice. Does anyone have this document and any other literature that explains/shows how these boxes work and how to set them up properly?
    Name:  IMGP5552.jpg
Views: 437
Size:  44.9 KBName:  IMGP5548.jpg
Views: 393
Size:  42.0 KB

    Thanks,

    Dale

  2. #2
    Join Date
    Sep 2006
    Location
    Alaska
    Posts
    464
    I don't know where to get documents for these boxes. I do know the bolt and nuts installed into the slots along with the springs set your min and max air flows.

  3. #3
    Join Date
    May 2002
    Location
    Baton Rouge, Louisiana
    Posts
    3,918
    THANK YOU COME AGAIN
    Attached Images Attached Images
    Quote Originally Posted by MatrixTransform View Post
    very soon it is you that will be pwned

  4. #4
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,635
    damn; Joey- 1976
    It`s better to be silent and thought the fool; than speak and remove all doubt.

  5. #5
    Joey,

    Thanks for finding the VAV-IN-5 document. At least now we're not flying blind.

    Take care,

    Dale

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event