-
unmounted cap
Go on service call behind a fellow tech that was there a couple times for a condenser breaker tripping. Bad part is the wires were long enough to reach factory cap mount.
-
don't you just love it when your fellow techs screw the pooch
 It`s better to be silent and thought the fool; than speak and remove all doubt. 
-
 Originally Posted by killeentech
Bad part is the wires were long enough to reach factory cap mount.
Yeah, but then there's a lot of work to put the cap in the strap and tighten it down.
Every customer you take for granted today will be someone else's tomorrow.
-
I see this all the time and short wires is not an excuse.....you can ADD wire to reach the panel.
-
You my friend are yet another victim of the run cap bandit!
-
How do these guys have jobs and who pays for the cap that THEY fryed by inproper install?
I would not have a job if I did that. I wouldn't wanna work with guys that worked like that and if I did find out we would chirp him till he either smartend up or quit.
-
The important questions are, did the customer have to pay for the repair of the repair and did the "tech" receive the highly coveted boot shaped bruise award?
-
This "quality" of work is rampant throughout the US in residential work. I've worked for bosses who would have told the guy that next time he needs to make sure there is more tape wrapped around the terminals or to just make sure it hangs in dead space off the wires so it won't rub.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Related Forums
The place where Electrical professionals meet.
|