Results 1 to 2 of 2

Thread: Trane VAV

  1. #1
    Join Date
    Oct 2005
    Posts
    323

    Trane VAV

    We need to put Trane controls in a Metalaire VAV. I tried to order the VAV-UCM controller but the parts guy only came up with the board, not the pressure transducer (and cable). Anyone know what part(s) I need? Thanks.

  2. #2
    Join Date
    Mar 2011
    Location
    North Carolina Piedmont Area
    Posts
    450
    Quote Originally Posted by tlp261 View Post
    We need to put Trane controls in a Metalaire VAV. I tried to order the VAV-UCM controller but the parts guy only came up with the board, not the pressure transducer (and cable). Anyone know what part(s) I need? Thanks.
    Are currently running Tracer Summit now? if so you will also need to configure UCM controller which I am sure you already know. It sounds like you will be setting the VAV type as a generic box. You will need to match the stroke time for 5-minutes or 90-seconds depending on type which you use.
    It is possible to use a standard Belimo actuator 90 second stroke time. However you may have to commission it with the use of the Rover tool, or it may not calibrate correctly- Just a heads up.

    Direct Couple Actuator PN: X13611023010
    4 Wire Pan cake Motor
    PN: ACT417 90-108 Second Motor

    Direct Coupled Actuator
    Trane X13611064010
    Sinro: SRD02-0424A-N6
    with wire harness & Connector No Cover- Varitrac
    72/60 Seconds 35 Lb

    Pressure Transducer PN: SEN0 1465 w/connector

    Hope this helps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event