Results 1 to 8 of 8
  1. #1
    Join Date
    Feb 2011
    Location
    Chesterfield, Virginia, USA
    Posts
    84

    Teletrol 186 info needed

    I ran into an old Teletrol 186 Integrator today that is has the "error light" on solid. They lost their building's transformer and now the system will not run. There is no information on site about this system. Does anyone have any info or manuals for this system?

    Recently their old GE/Fuji freq drive blew its top so we put in a Johnson Control freq to get them back up. This is an old Marlo hot deck/cold deck system but these people do not have a lot of money as they are a low profit organization that helps people.
    Thanks,
    John

  2. #2
    Join Date
    Sep 2002
    Location
    Hampton Roads, Virginia
    Posts
    1,629
    Quote Originally Posted by Failure2Comply View Post
    I ran into an old Teletrol 186 Integrator today that is has the "error light" on solid. They lost their building's transformer and now the system will not run. There is no information on site about this system. Does anyone have any info or manuals for this system?

    Recently their old GE/Fuji freq drive blew its top so we put in a Johnson Control freq to get them back up. This is an old Marlo hot deck/cold deck system but these people do not have a lot of money as they are a low profit organization that helps people.
    Thanks,
    John

    Put your email address in your profile and I will send you some info. Where in VA are you?

    Kevin
    "There are 10 types of people in the world.. those who understand binary, and those who don't."

  3. #3
    Join Date
    Feb 2011
    Location
    Chesterfield, Virginia, USA
    Posts
    84
    I am in Chesterfield Co.
    Thanks,
    John

  4. #4
    Join Date
    Feb 2011
    Location
    Chesterfield, Virginia, USA
    Posts
    84
    Thank you for the manual and information.
    John

  5. #5
    Join Date
    Dec 2002
    Location
    N.J.
    Posts
    92
    Do you have a installation manual for the teletrol integrator 186. I want to hook up a laptop with a local (direct connection) but I must be doing something wrong I get an internal error. Any help would be greatly appreciated.

  6. #6
    Join Date
    Apr 2009
    Location
    Denver, CO
    Posts
    35
    I sent you a network installation manual. Hope it will help.

  7. #7
    Join Date
    Apr 2006
    Location
    Columbus, Ohio
    Posts
    815
    Quote Originally Posted by Denhvax View Post
    I sent you a network installation manual. Hope it will help.
    I was just curious.. With those old Teletrol Integrator 186 panels don't you need the site database in order to connect and see the points or is there a upload command that you can extract all of the programming? I know typically I get the database added to my computer before I connect.

    Thanks!
    J. King

  8. #8
    Join Date
    Nov 2011
    Posts
    9
    If the error light is on, the program is most likely flushed out, which would mean you wouldn't be able to see any points or data. There was no way to upload the program from those controllers. The program was held by a li-ion battery (looks like a AA, but isn't). If the battery was dead & you lost power, you also lost the program.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event