hi humidity when compressor is in off cycle - Page 2
Page 2 of 2 FirstFirst 12
Results 14 to 15 of 15
  1. #14
    Join Date
    Aug 2012
    Location
    rising sun md
    Posts
    5
    I found out that the ac was orginally to supply a large server room and a engineer decided to use it in a small office application instead! Its a single stage dx cooling unit and i double checked for water in the drain pan but everything checks out good. I decided that im going to try and duct the excess air to an unconditioned hallway first and go from there! Thanks everyone for all the help!

  2. #15
    Join Date
    Oct 2011
    Location
    NJ
    Posts
    149
    You could look into fitting the unit with an aftermarket Hot Gas Bypass system. This will allow the compressor to run longer and better match capacity.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event