134A disappearing

[knotbuggin]

Tube leak is doubtful but NOT impossible.

Schedule an eddy current ....

Leak check and check and check every inch ...

Still can't find it ?

Go back in two weeks and another two weeks and follow the factory charging procedure ,I'm sure you did this time , and if it's low you have an idea of your leak rate.

What is a eddy current

[Dallas Duster]

What is a eddy current

This question is where the search feature comes in handy even google can answer it.

[Tommy knocker]

What is a eddy current

A test you can have done to tell you what the integrity of your tubes is. Can't tell exactly how the magic they use all works but it's very helpful information to have. It will tell what tubes are leakin and what tubes are about too. Unless you want to buy the equipment and start doing it yourself, extremely expensive, how the magic works isn't all that important.

[Tommy knocker]

Fix your leaks I doubt you have a cooler leak.

He is asking for a little help not insults. Go to pro side a dazzle them with you superiority. Your arrogance wipes out all credibility here coupled with the hypocrisy you become "that guy". Just saying.

[Dallas Duster]

He is asking for a little help not insults. Go to pro side a dazzle them with you superiority. Your arrogance wipes out all credibility here coupled with the hypocrisy you become "that guy". Just saying.

I'm not insulting him just answered his him directly. Keep your nose out of my business , nobody asked you to respond to my insights.

[mikeacman]

Like I said ,,, look and look and look some more , check every possible area that has 134 behind it ,I've found some leaks in some unexpected places before ...

If you can't find one resort to going back in couple weeks and thereafter to monitor leak rates ..

Years ago I chased a leak all summer ,,,added charge every week,,,couldn't find a leak anywhere....

Turns out a kid was filling trash bags with the refrigerant at night so he could huff it and get high

[Tommy knocker]

I'm not insulting him just answered his him directly. Keep your nose out of my business , nobody asked you to respond to my insights.

Waaaaaa!! He who lives in glass house. Well you know the rest. I'm sure it's in a manual somewhere.

[Dallas Duster]

Waaaaaa!! He who lives in glass house. Well you know the rest. I'm sure it's in a manual somewhere.

Please do not quote me Tommy Sucker your giving me a bad reputation here on the forum.

[knotbuggin]

OK I am going to charge it up one more time Then see whats up again .

[Dallas Duster]

OK I am going to charge it up one more time Then see whats up again .

Tighten up the packing nut on the discharge ball valve. Get her running at 100% with the liquid level between 1.8 -2.0.

[knotbuggin]

I will get it right today and see in the am where were at .

[Tommy knocker]

Please do not quote me Tommy Sucker your giving me a bad reputation here on the forum.

Ya. That guy

[mikeacman]

Back on topic...

To the OP...

Are you losing charge that fast? I am under the impression you just added to this like a day ago ....