Originally Posted by
JEF1980
We recently had the same problem it is a YK with newer microboard we replaced power supply and it went away. We had to pull the J1 connector also. Power supply checked out ok but it was dropping out when we were'nt there.
we have been finding a lot of those J1 connector harnesses failing...make sure you always order the longer one...makes my wife happy too!
"Right" is not the same as "Wise".
Don't step on my favorite part of the Constitution just to point out your favorite part.
Just because you can measure it, doesn't mean it is important. Just because you can't measure it, doesn't mean it isn't important.