Results 1 to 13 of 13
-
07-24-2012, 03:02 PM #1
Professional Member
- Join Date
- Oct 2009
- Location
- Mukwonago, WI
- Posts
- 202
I got thrown under the bus by another contractor.
This one has some history to it. Last fall we were contracted to add in-floor and unico to a new sunroom addition in a very nice neighborhood. well the GC stole a bunch of money, we never got paid. We were contracted by the new GC to finish the job, and we did. Added a 6" takeoff, with damper, in the attic and ran it out to the new sunroom, with some unico taps off of that.
Well this was in march, we finished the job and I left the damper closed until the construction was finished. Got a call last week, that they were ready to have cooling, so I sent a kid out, open the damper. got a call about 4 hours later that the whole first floor was not cooling. The homeowner had another contractor in (for whatever reason), he inspected all the units and said they were working fine. he told the homeowner that i had installed the wrong ductwork, i didn't not install unico ductwork and the addition was sucking all the air from the whole house.
I ran out, closed the damper (as the room was still blocked off with plastic and didn't have an return air. (really didn't get into it as we haven't been paid a red cent for this job, and she apparently didn't want to use us for service. Told her I would come back and balance the system when they were all done. This was friday.
Had a message Monday morning, the whole 1st floor was hot all weekend, that i didn't install the duct-work right and that was messing up the whole house, the other contractor was out again and verified all the equipment was working, that the issues were due to my duct-work being installed wrong, duct leakage.
So I go out there this morning, she shows me the upstairs is cold, first floor is warm and basement is cold. Alright, then she shows me the three thermostats. I go out and walk around the house. Then I went inside and brought her out and showed her the condenser she didn't know she had that serves the first floor, that had a bad condenser fan motor and compressor.
I guess the other guy was too busy blaming me for the "bad ductwork" to take a minute to count the thermostats or take a walk around the house.
-
07-24-2012, 03:34 PM #2
Wheres the photo?
"If anybody can draw on the power, where do we put the meter?" - JP Morgan before pulling Tesla funding
-
07-24-2012, 04:20 PM #3
Professional Member
- Join Date
- Oct 2009
- Location
- Mukwonago, WI
- Posts
- 202
I'll take one when I change out the condenser.
-
07-24-2012, 07:57 PM #4
Don't you love it when you can tub there nose in it.
Sent from my PC36100 using Tapatalk 2
-
07-24-2012, 08:42 PM #5
-
07-25-2012, 03:45 PM #6
BAM!! How do you like me now Biotch. Thats what I would have been saying and did you have fun paying for your other service tech to bad mouth me and miss the real problem. Next time bend over and use your Good eye!
-
07-25-2012, 08:34 PM #7
Professional Member*
- Join Date
- Jun 2007
- Location
- Williamsport, PA
- Posts
- 144
Some years ago I condemed a compressor on a flower cooler at a small shop, it was a couple days after I had changed a condenser motor. Valves were damaged from running without the condenser fan motor for god knows how long. Lady worked by herself and didnt do much bussiness. She called another contractor to ge a second opinion. He told her that we ruined the compressor because the valve on the reciver was not all the way open. I guess i did not fully front seat it before leaving. Long story short, i replaced her compressor for nothing. She said "I discussed this with my priest and he feels you are responsable". Both her and the other contractor are out of buissiness now. Priest is still around.
-
07-25-2012, 09:53 PM #8
-
07-25-2012, 10:47 PM #9
Professional Member*
- Join Date
- Jun 2007
- Location
- Williamsport, PA
- Posts
- 144
I realized she could not afford to pay for the compressor. i felt it was worth the cost of the compressor to end the argument. My point was that some contractors thrive on trying to make everone else but them look bad, I think that just breeds distrust by customers for everone in the industry.
-
07-25-2012, 11:35 PM #10
-
07-26-2012, 09:19 PM #11
-
07-26-2012, 09:34 PM #12
Professional Member*
- Join Date
- Nov 2001
- Location
- east kansas
- Posts
- 7,969
-
07-28-2012, 10:54 PM #13


Reply With Quote
