Results 1 to 3 of 3

Thread: T23G

  1. #1
    Join Date
    Oct 2011
    Location
    Chicagoland Area
    Posts
    4,302

    T23G

    Do I need to drill a hole in the back of the cabinet to change out the cap tube?
    Officially, Down for the count

    YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET

    It was working when I left...
    Liberalism-Ideas so good they mandate them

  2. #2
    Join Date
    Jun 2009
    Location
    DFW, TX
    Posts
    569
    That is the easiest way to do it. Try not to drill through the suction line, though, like I did. Then you have to run a new cap tube and suction line.

  3. #3
    Join Date
    Aug 2002
    Posts
    70
    When you get a chance, call True and ask if they will send you their service manual. It covers cap tubes and alot of other info.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event