Results 1 to 5 of 5

Thread: Weather Station

  1. #1
    Join Date
    Dec 2011
    Posts
    43

    Weather Station

    Does anyone have any recommendations for a high quality weather station to measure outside air temperature and humidity? I would like it to be compatible with either a Siemens or JCI controls system.

  2. #2
    Join Date
    Jul 2008
    Posts
    1,453
    1 + 1 = 3 ( *** for very large values of 1)

    ...everybody wants a box of chocolates and long stemmed rose

  3. #3
    Join Date
    Mar 2007
    Posts
    272

  4. #4
    Join Date
    Jul 2007
    Location
    Mount Airy, MD
    Posts
    7,281
    Should go with the JCI "FX" line, you could also use the local weather service as a back up to your onsite sensors

  5. #5
    Join Date
    Jul 2012
    Location
    Northern NY
    Posts
    121
    If you are just looking for outdoor air and humidity you don't need a weather station, just an outdoor air temp & humidity sensor that outputs the correct signal.

    I use these from Senva quite often and they work well. They also have CO2 and CO available, if you need wind speed or other condition sensors you will have to look around.

    http://www.senvainc.com/templates/pr...p?GroupGuid=19


    -Jeremy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event