Second time i have changed out these gaskets on the evaporator bundle of the chiller and for some reason a small section blows out after i nitrogen test it, and charge it. I know the torque specs are 55 lbs, i glew the gaskets with some contact glue onto the baffle so they stay in place. Everything looks great i then nitro check it with 125 lbs soap the **** out of it. Pull vaccum then weigh in my charge. Units running great i leave then at some point a small section blows out. Any suggestions would help, we all know losing 140lbs of r-22 we get ur butt fired in a hurry.