Page 1 of 2 12 LastLast
Results 1 to 13 of 20
  1. #1
    Join Date
    Jun 2012
    Location
    Northern NJ
    Posts
    10

    mini-split indoor units

    Greetings.

    One of my customers would like to install air conditioning. They have hydronic heat and the house is relatively small. I thought that a mini-split would be ideal. The problem is that most indoor units are 35 to 45 inches wide and I just don't have a home for this. Does anyone know of an indoor unit that is about 24 inches wide. I would be installing this in a free standing closet and blowing the conditioned air out the top into a great room. I probably could install a conventional system, however, because the closet is in the living space, I am concerned about the sound level. Suggestions would be appreciated. Thanks

  2. #2
    Join Date
    May 2004
    Location
    Austin, TX
    Posts
    1,741
    I can't think of a single model that is only 24" wide.

  3. #3
    Join Date
    Jul 2012
    Location
    Dillwyn, VA
    Posts
    44
    Maybe a window unit

  4. #4
    Join Date
    Dec 2006
    Location
    Litchfield,Il
    Posts
    565
    There has to be a place somewhere on an exterior wall. If you have that many windows your in trouble.
    If your not getting the results you desire then change. People change from either desperation or inspiration.

  5. #5
    Join Date
    Jun 2012
    Location
    Great lakes
    Posts
    41
    I know I installed a mini split that was a ceiling mount, can't really rember the name brand tho. But they are out their

  6. #6
    Join Date
    May 2012
    Location
    San Diego, CA
    Posts
    352
    I couldn't find one for Mitsubishi but LG has wall frames and ceiling mounted ones... I am sure all the other manufacturers do too...

    http://www.lg.com/ca_en/air-conditio...tial/index.jsp
    You can call me Sam

    It should be a crime to be a mechanical engineer in San Diego
    Summer Design Temperature: 83 F Dry Bulb ~ 69 F Wet Bulb (California Climate Zone 7)

  7. #7
    Join Date
    Jul 2012
    Location
    Dillwyn, VA
    Posts
    44
    Mitsubishi makes a flush ceiling mount air handler unit

  8. #8
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    34,584
    We did a 3 head Mitsu system a few months ago. Due to no place to put a wall unit, one room got a floor mount. Rather pricey but what we had to do.

  9. #9
    Join Date
    Aug 2004
    Location
    North Richland Hills, Texas
    Posts
    14,915
    Is there an attic?
    If so, some of the mini split manufacturers make ducted air handlers.
    If more government is the answer, then it's a really stupid question.

  10. #10
    Join Date
    Jun 2012
    Location
    The Woodlands, Texas
    Posts
    64
    I did a lot of HVAC work while I was in the US Army and most of it was with European and Asian mini split systems.

    All of the big brands (Mitsu - Fujitsu - LG) would offer you two options.

    A small air handler type unit, that would fit in an attic or a crawlspace, and feed ductwork.

    There is also what is called a ceiling recessed unit, that mounts flush with the ceiling.

    Tony

  11. #11
    Join Date
    Jun 2012
    Location
    Northern NJ
    Posts
    10
    The room to be conditioned is a great room with a cathedral ceiling ... no attic. The only exterior wall has a fireplace and a pair of windows ... no space for an indoor unit. The other 3 walls are either covered with furnishings or are archways to other rooms. This is the reason that I chose to put a unit in a closet that separates the great room from another part of house. This closet is 24" deep on the interior and about 40" wide; the 24" side is adjcent to great room. I had cosidered putting a ducted evaporator in the closet, but they all seem to be 35 to 42 " wide ... thus it will not fit. I also considered using one of the ceiling mounted units that are about 24" square. To do this I would have to mount it upside down on top of the free standing closet. I understand that this will not work because drainpan will not catch condensate. Further, these units will not handle the 2 ton that I think we need.


    At this point, I think the closet will get a conventional air handler that takes air in at the bottom of the closet and blows it out the top toward the top of the cathedral ceiling. I am concerned with noise levels as the closet is only about 7' high which means the blower will be close to the supply and return to the living space. I'm considering a 2 stage compressor so it can run at a low speed most of the time an only run high when necessary. I have not found documentation concerning what controls the speed.

    Is it possible to run a mini-split compressor with an conventional air handler? I don't know what kind of control signals are available to get these 2 units to work together and to modulate speed when necessary. Further, I don' know if any manufacturer woud warranty such a configuration.

    I appreciate \your thoughts and thanks for comments to date.

  12. #12
    Join Date
    Jun 2011
    Location
    New Mexico
    Posts
    18
    Mitsubishi makes a 2-ton vertical air handler that is 18" wide and 21" deep. It would connect with a 3-ton condensing unit. It is from their City Multi line, which allows multiple evaporators with a single condenser.

    http://usa.mylinkdrive.com/uploads/d..._Submittal.pdf

    http://usa.mylinkdrive.com/uploads/d..._Submittal.pdf

  13. #13
    Join Date
    Mar 2010
    Location
    Kent, WA.
    Posts
    189
    fujitsu makes a unit called slim duct. im sure mitsu and the other ductless manufacturers make similar system. they are designed for minimal ductwork like in a wall with a low return and high discharge. or in a sofit where somebody might want some nice linear diffusers.
    Experience
    Is what you get when you didn't get what you wanted.

    A positive attidude will not solve all your problems, but it will annoy enough people to make it worthwhile.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event