Results 1 to 2 of 2
  1. #1

    Problem with Liebert icom

    Dear members,
    After trying some P2P configurations we returned the cabling to the original configuration, but now the iCom Display int he liebert unit apparently doesn't communicate with the HVAC anymore and the display is not showing temperature, humidity , etc. values. Only the web card is displaying the values but not the iCom.. Any ideas on this? maybe the display is damaged?
    Thanks
    khaxan

  2. #2
    Join Date
    Feb 2011
    Location
    Sacramento, CA
    Posts
    147
    My memory is failing me, but the board in the unit and the iCOM controller each have their own addresses. It sounds like the iCOM can see the other unit in the network but it can't see the unit it is attached to. Check the networking settings something is not correct in the settings. I'm sorry I don't have my book with me right now. Liebert tech support will also be able to help you.
    I have done so much with so little for so long, that now I can do almost anything with nothing at all.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event