Results 1 to 6 of 6
Thread: Can't tell if trap is plugged?
07-05-2012, 12:45 PM #1
Can't tell if trap is plugged?
Found this today. Maybe I should have took a picture of the coffee cans all over the guys office below the RTU lol.
07-05-2012, 08:06 PM #2
Those lennox pans get crapped up more than any other I've seen.Local 597 Service Fitter
Metal Trade Journeyman
PAY ME NOW OR PAY ME LATER
It was working when I left...
07-05-2012, 10:54 PM #3Can someone please explain to me -
Why is there never enough time to do it right the first time, but plenty of time to do it twice?
Please view site rules: http://hvac-talk.com/vbb/showthread.php?t=1241
Apply for Pro Membership: http://hvac-talk.com/vbb/showthread.php?t=116113
Find your local HVAC-Talk Contractor: http://icemeister.net/aop_map.html
07-05-2012, 08:39 PM #4
It's terrible, this is the second time I've had to do this on this unit. I have to go back with some way to get that junk out. Any good ideas?
07-05-2012, 08:53 PM #5
i use a garden hose with a 45* angle on the nozzle and take the trap off. just dont flood everything. but you can sweep all the gunk out that way. i started doing this on a unit that had a curb that was unlevel. no problem since
07-05-2012, 10:44 PM #6
I think water is about a mile away lol. The pan is not in good reach either. I think flushing would be the best, the ceiling below is ruined already so I guess what's the difference lol.