Results 1 to 7 of 7
  1. #1
    Join Date
    Jan 2011
    Posts
    586

    Just another hybrid system.

    Put this one in a while back.
    Attached Images Attached Images    

  2. #2
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    33,888
    Nice

  3. #3
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,635
    how much room you got to service that odu, looks kind of thin
    It`s better to be silent and thought the fool; than speak and remove all doubt.

  4. #4
    Join Date
    Jan 2011
    Posts
    586
    Plenty. I was bickering because I had to hold it back in the corner but it wasn't bad to solder in. Room to walk around the other side and behind it as well. I did all my bending before I set the unit on the pad though.

  5. #5
    Join Date
    Aug 2011
    Location
    Goose Creek ,SC
    Posts
    252
    Nice copper work.
    "I just think things should work properly"
    Freon is a brand name-word


  6. #6
    Join Date
    Dec 2000
    Location
    Flat Rock, NC
    Posts
    463
    Nice copper work, have to ask about the missing drier though. Great looking job

  7. #7
    Join Date
    Jan 2011
    Posts
    586
    Drier is inside, LL line runs on the back side of the suction.. kinda hidden.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event