Commercial Walk In Freezer - PMs
I had a walk in freezer last week that 'the entire fan and fan motor freezed up' - what causes this and what can I do in the future to prevent this? My repair bill was $$$$.
Also, Im a big believer in PMs(preventive maintenance) and would like to know from the Pros their recommendations as to what really needs done to help prolong kitchen equipment.
thank you .
Last edited by jpsmith1cm; 07-02-2012 at 07:18 PM.
Froze up with ice or the bearings in the motor failed??
Typically in our pm I will:
Check defrost heaters, drain heaters, and terminators
Check door heaters, gaskets, door closures, and other hardware
Check fan motor bearings
Check refrigerant charge
Replace any torn curtains in the entry way behind the door and get after any of the staff that prop the door open or tie them up....
And anything else I see that sticks out that needs to get handled....
This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread.
You can find the rules for posting and qualifications here.
Additional infractions may result in loss of posting privileges.
Your post has been deleted.