Results 1 to 2 of 2
  1. #1
    Join Date
    May 2013
    Location
    Fort Worth, Texas
    Posts
    4

    JCI PCG Terminal Blocks

    Does anyone have a wiring block they use with JCI PCG controllers?
    The terminal blocks are not removable; to change out a controller the entire controller must be re-wired.
    If there were terminal strips I could use for initial wiring it would make subsequent replacement much easier.

    Thanks!
    Tom

  2. #2
    Join Date
    Mar 2009
    Location
    Several Miles from Sane
    Posts
    1,471
    You will need to order p/n AP-TBK1002-0 for 2 pole terminals and AP-TBK1003-0 for 3 pole terminals.

    They are very proud of those things so don't be too surprised at the price.
    If sense were so common everyone would have it !

    All opinions expressed are my own. Any advice provided is based on personal experience, generally accepted fact or publicly available information. As such, it is worth exactly what you paid for it, not a penny more not a penny less !!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event