Results 1 to 8 of 8
  1. #1
    Join Date
    Jan 2012
    Posts
    63

    Amana Control board issue

    Did i service call for no air blowing got up in the attic and checked the board. I would press the door switch and i would hear a click red light then nothing... I could hear the lines going which mean the condenser clicked on... but no blower.. im getting all the voltage i jumped the R and G and no fan... normal operation would be a steady red blinking light but nothing. Just one blink which means SYSTEM LOCKOUT (RETRIES/RECYCLES EXCEEDED) what do i need to do??

  2. #2
    Join Date
    May 2011
    Location
    Ripley, WV
    Posts
    1,355
    Can you get pro status? I want to help but don't want a DIYer to read our discussion and fry themself.
    Last edited by Rob_in_WV; 06-29-2012 at 12:35 AM. Reason: Didn't realize I wasn't in the Pro's forum.

  3. #3
    Join Date
    Jan 2012
    Posts
    63
    Lol I'll do it in the morning. Im getting ready for bed. Thanks for the help

  4. #4
    Join Date
    May 2009
    Location
    oklahoma
    Posts
    298
    You could try wiring the motor to run direct to see if it works. Would also check your limit switches.

  5. #5
    Join Date
    May 2009
    Location
    oklahoma
    Posts
    298
    Also try wiring around the door switch temporarily

  6. #6
    Join Date
    Feb 2010
    Location
    Calgary, Alberta
    Posts
    1,153
    Did you try turning the fan wheel by hand? Check the run cap? Ohm out the run windings? Check for line voltage at the speed taps on the board?

  7. #7
    Join Date
    Jan 2012
    Posts
    63
    Yes I did all of it I couldnt get a jumper to bypass the door switch

  8. #8
    Join Date
    Jan 2012
    Posts
    63
    Forgot to mention it was a variable speed

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event