Results 1 to 11 of 11
Thread: Loytec LROC Room Automation Demo
-
06-28-2012, 10:39 AM #1
Professional Member
- Join Date
- Feb 2008
- Location
- Purcellville Va.
- Posts
- 652
Loytec LROC Room Automation Demo
I got to see this first hand when I was in Austria.
It really did take less than 30 minutes to engineer and deploy controls for a five story building complete with graphics.
-
06-28-2012, 03:18 PM #2
Looks great on smart phones and The Ipad also.
This platform simply put is awesome!
-
06-28-2012, 07:45 PM #3
So if Loytec is good for simple stuff, how is it for complex stuff?
kontrol out"Can't we all just get a Lon?" - Garry Jack
"BACnet: integration or interrogation?" - The Janitor
"Open protocols? You can't handle open protocols!" - Nathan R. Jessup
“What’s that? Aaa… open protocols? Don’t talk about…. open protocols? Are you kidding me? Open protocols? I just hope we can hardwire an interface!” - Jim Mora http://www.youtube.com/watch?v=U7fjDS0jKiE
-
06-28-2012, 08:00 PM #4
Professional Member
- Join Date
- Feb 2008
- Location
- Purcellville Va.
- Posts
- 652
Quite well I'm sure.So if Loytec is good for simple stuff, how is it for complex stuff?
kontrol out
I see no reason why you couldn't do just about anything.
Did you have something in mind?
-
06-28-2012, 08:14 PM #5
No, just trying to balance out the blatant Loytec manlove sprewed by Daryl's minions.
kontrol out"Can't we all just get a Lon?" - Garry Jack
"BACnet: integration or interrogation?" - The Janitor
"Open protocols? You can't handle open protocols!" - Nathan R. Jessup
“What’s that? Aaa… open protocols? Don’t talk about…. open protocols? Are you kidding me? Open protocols? I just hope we can hardwire an interface!” - Jim Mora http://www.youtube.com/watch?v=U7fjDS0jKiE
-
06-28-2012, 08:30 PM #6
Professional Member
- Join Date
- Feb 2008
- Location
- Purcellville Va.
- Posts
- 652
Obviously you have something against Daryl and that is between you two but what does that have to do with what I have posted????No, just trying to balance out the blatant Loytec manlove sprewed by Daryl's minions.
kontrol out
What needs to be "balanced out" because if I'm misrepresenting something here then I would personally like to know?
-
06-28-2012, 08:40 PM #7
Nothing to do with you 381 or any of your posts.
kontrol out"Can't we all just get a Lon?" - Garry Jack
"BACnet: integration or interrogation?" - The Janitor
"Open protocols? You can't handle open protocols!" - Nathan R. Jessup
“What’s that? Aaa… open protocols? Don’t talk about…. open protocols? Are you kidding me? Open protocols? I just hope we can hardwire an interface!” - Jim Mora http://www.youtube.com/watch?v=U7fjDS0jKiE
-
06-28-2012, 09:02 PM #8
Not speaking for kontrolphreak, but the battlescars tend to itch when Loytec is brought up
"If you can't explain it simply, you don't understand it well enough”
Albert Einstein
"Don't you just love when the flames burn off the wiring schematic?" hvacvegas-HTALK member
-
06-29-2012, 01:40 AM #9
Regular Guest
- Join Date
- Feb 2012
- Posts
- 31
What type of control systems do others install if this system is not complex? A point the developer made that is very important is that the control system can be modified dynamically at runtime.
Any software I would utilise has a configuration tool, a Workstation software or configuration software to make system configuration changes. This is not a requirement for this control system.
Room control in itself can also have complexity. The integration is not always straightaway and sun blind or facade management control requires very exacting control schemes.
It appears this may be the first commercially available system based on the IEC 61499 standard.
-
06-29-2012, 02:44 AM #10
Nothing better than minion man love!

It is really cool."How it can be considered "Open" is beyond me. Calling it "voyeur-ed" would be more accurate." pka LeroyMac, SkyIsBlue, fka Freddy-B, Mongo, IndyBlue
BIG Government = More Dependents
http://threedevilskennel.com/ - not my website.
Versatile Hunting Dog Federation - www.vhdf.org/
-
06-29-2012, 12:30 PM #11


Reply With Quote
