Page 1 of 2 12 LastLast
Results 1 to 13 of 48

Hybrid View

  1. #1
    Join Date
    Apr 2010
    Location
    working overtime
    Posts
    848

    company supplied tools

    What tools should a employer supply. Should they contribute to cost of new tools or repair existing broken tools. I would also ask you to specify union or not. That makes a big diffrence in what your employers do and is relevant to the question. Gotta compare apples to apples

  2. #2
    Join Date
    Apr 2010
    Location
    working overtime
    Posts
    848

    my company

    We are supplied with equipment for trucks such as straps and bins and buckets and can go to home depot whenever for that stuff. We get 250bucks a year to fix old tools or buy new. And they supply torches,vac pump, recovery machin dollars e,scale, and all other tools are furnished by the techs. I estimated the cost of all tools on my truck to be in the range of 6,000 that's including some stuff I plan to purchase. I calculated the cost of tools that i would like to buy and found about another 4,000 dollars. Just wanted to debate what share employers should pick up or if any at all.

  3. #3
    Join Date
    Mar 2005
    Location
    Florida
    Posts
    985
    As an employer I don't like to buy any tools for the techs. I prefer to agree on a reasonable tool allowance. This way when a ladder gets left on the job, not my problem.

  4. #4
    Join Date
    Feb 2012
    Location
    GTA, ON
    Posts
    1,263
    Quote Originally Posted by cool-in-cayman View Post
    As an employer I don't like to buy any tools for the techs. I prefer to agree on a reasonable tool allowance. This way when a ladder gets left on the job, not my problem.
    Ladder left on the job? What kinda techs do you get down there in AZ?

    Over here, typically the tech is responsible for hand tools, multimeters, manometers, gun, sniffer, gauges and some of the power tools (typically hammer, impact, sawzall, but not rotary hammer - that one's on the bossman). The company supplies the ladders, vac pump, reclaimer, combustion analyzer. Upper year apprentices (4th-5th) would sometimes get tool replacement costs covered (you look at the UEI multimeter cockeyed, it craps out, the bossman gets you a new one) as long as they don't abuse the system.

  5. #5
    Join Date
    Mar 2005
    Location
    Florida
    Posts
    985
    Quote Originally Posted by Moonrunner View Post
    Ladder left on the job? What kinda techs do you get down there in AZ?

    Over here, typically the tech is responsible for hand tools, multimeters, manometers, gun, sniffer, gauges and some of the power tools (typically hammer, impact, sawzall, but not rotary hammer - that one's on the bossman). The company supplies the ladders, vac pump, reclaimer, combustion analyzer. Upper year apprentices (4th-5th) would sometimes get tool replacement costs covered (you look at the UEI multimeter cockeyed, it craps out, the bossman gets you a new one) as long as they don't abuse the system.
    You'd be surprised. And it's not just Az. If I had every lost ladder back from over the years I could probably start a ladder store online and retire.

    I don't want to manage peoples tools and as many above have indicated they prefer to buy their own. I negotiate how much money is fair to use their tools while working for me. Everyone's happy.

    And you'd surprise how much longer the tools last this way.

  6. #6
    Join Date
    Dec 2004
    Location
    Chicago area
    Posts
    1,439
    Quote Originally Posted by cool-in-cayman View Post
    You'd be surprised. And it's not just Az. If I had every lost ladder back from over the years I could probably start a ladder store online and retire.

    I don't want to manage peoples tools and as many above have indicated they prefer to buy their own. I negotiate how much money is fair to use their tools while working for me. Everyone's happy.

    And you'd surprise how much longer the tools last this way.
    Not providing ladders is outrageous.

    " hey mr boss man, I need a 40 ft extension ladder to get on the roof over here."

    Reply - " no problem, there only 600 bucks, so go pick one up at grainger, oh by the way, I'm gonna take it out of your paycheck this week, that should leave with enough money to get a sandwich and a pack of smokes. "

  7. #7
    Join Date
    Nov 2004
    Location
    up in the hizzy
    Posts
    1,377
    Quote Originally Posted by heatingman View Post
    Not providing ladders is outrageous.

    " hey mr boss man, I need a 40 ft extension ladder to get on the roof over here."

    Reply - " no problem, there only 600 bucks, so go pick one up at grainger, oh by the way, I'm gonna take it out of your paycheck this week, that should leave with enough money to get a sandwich and a pack of smokes. "
    And I thought I knew what a bottomfeeder was, makes you wonder who he hires under such conditions,probably ex-cons and Slur removed, and then some here bash the unions.
    Last edited by Stamas; 06-25-2012 at 05:12 AM.

  8. #8
    Join Date
    Nov 2006
    Location
    Southeastern Pa
    Posts
    18,557
    Quote Originally Posted by cavalieri85 View Post
    What tools should a employer supply. Should they contribute to cost of new tools or repair existing broken tools. I would also ask you to specify union or not. That makes a big diffrence in what your employers do and is relevant to the question. Gotta compare apples to apples
    My Co offers to supply vacuum pump and recovery machine, B tank with torch, and maybe a couple of other small items, like new hoses every year.

    I take the hoses, but every other tool is mine.

    No tool allowance.
    [Avatar photo from a Florida training accident. Everyone walked away.]
    2 Tim 3:16-17

    RSES CMS, HVAC Electrical Specialist

    AOP Forum Rules:







  9. #9
    Join Date
    Dec 2004
    Location
    Chicago area
    Posts
    1,439
    Most companies I've worked for supply the truck, ladders, recovery machine, vac pump, big hammer drill such as hilti, ppe such as fall gear, lifts, hoists, dollies, and combustion analyzer, pipe threader, welder if the company gets into that.

    I have all else, but also have my own vac pump, recovery machine, pipe threader, torch set, and combustion analyzer.

    The pipe threader and recovery machine are on the truck only as needed.

    I use the company recovery machine, but generally my vac pump, b/c the company pumps usually don't pull well. I have my recovery machine as a back up.

    I would never supply my own ladders, ppe, or lockout beyond a simple lock.

    I'm non union

  10. #10
    Join Date
    Nov 2004
    Location
    up in the hizzy
    Posts
    1,377
    Worked non-union, bought all my tools,name it, I own it! some non-union companies provided the very minimum (ladders, vacuum pump, recovery unit) other give a little more.
    Joined the union, sold most of my tools, employer provides me with everything from service wrenches to combustion analyzers,when I need a tool I call the office, get a PO# and buy it, I still carry some of my tools cause of old habits.

  11. #11
    Join Date
    Mar 2007
    Posts
    3,108
    Company supplies specialty items and all PPE, I supply everything else. There are things like meters, leak detectors, vacuum gauges, and certain wrenches that they will provide, but I choose to use my own stuff. If anything I am using breaks on the job, no matter who it belongs to, they'll replace it with no questions asked. I would rather buy high quality stuff of my choosing than have to use whatever is in the shop or whatever their preferred supplier carries.
    "There is no greater inequality than the equal treatment of unequals."

    -Thomas Jefferson

  12. #12
    Join Date
    Sep 2008
    Location
    Western PA
    Posts
    25,670
    Quote Originally Posted by Tech Rob View Post
    Company supplies specialty items and all PPE, I supply everything else. There are things like meters, leak detectors, vacuum gauges, and certain wrenches that they will provide, but I choose to use my own stuff. If anything I am using breaks on the job, no matter who it belongs to, they'll replace it with no questions asked. I would rather buy high quality stuff of my choosing than have to use whatever is in the shop or whatever their preferred supplier carries.
    Sounds a lot like me.

    My company would provide me with just about anything that I ask for, BUT, when I ask for this meter or that, I'm likely to get the low-end model.

    I've spent thousands of my own dollars to purchase high end tools and I expect those tools to be repaired and/or replaced by the company that I'm using them to make money for.

  13. #13
    Join Date
    Mar 2005
    Location
    Florida
    Posts
    985
    I negotiate every job I get....daily and I never whine to my boss, the customer, about having to buy materials for the job because I agreed upfront to do the job under the negotiated terms.

    Since none of you know what I am willing to pay for the use of your tools, including your ladder, how then can you say anything about the agreed upon terms?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event