Page 3 of 5 FirstFirst 12345 LastLast
Results 27 to 39 of 55

Thread: QUAD??

  1. #27
    Join Date
    Jun 2006
    Location
    Lititz, PA (Lit' itz) not ( Li' titz)
    Posts
    122
    In my area it is required to have at least 10 feet between the gas meter and other elecrtical stuff

  2. #28
    Join Date
    May 2006
    Posts
    98
    comming up on year two. not even a hiccup. fired them up and never looked back. Been installing goodman from day one and before, many janitrol units before that.have a great success ratio. doesn't matter what brand you use you always have problems. I sell Trane Lennox goodman coleman you name it I install what the customer wants and have as good of success with one as the other. Just keep the customer satisfied.
    There is no off switch to the genius mind!!

    Motors run on smoke!! When the smoke comes out of it, it needs a new one!

  3. #29
    Join Date
    Jan 2002
    Posts
    125
    The relays are not solid state. I agree with most other postings. Hey if it works it works. You have to do the best you can with eveyones budget in mind.
    Do it right the 1st. time!

  4. #30
    Join Date
    May 2006
    Posts
    98
    Just checking back in another note went up to them yesterday had a bad contactor on one of the HP units still cranking out cold and heat not even an ignitor out just like the energiser bunny keeps going and going!!
    There is no off switch to the genius mind!!

    Motors run on smoke!! When the smoke comes out of it, it needs a new one!

  5. #31
    Join Date
    May 2007
    Location
    Michigan
    Posts
    315

    Confused Oooooooooo, My

    I cant believe someone ran flexible fuel line attop of a appliance. The inspector for your neck of the woods needs better bifocals. The rest looks great, but something needs to be done about your fuel line!!!!!!!!

  6. #32
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,063
    Does that mean the gas lines being almost up against the relay system is ok.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  7. #33
    Join Date
    Jul 2001
    Posts
    3,112
    Looks good except for the CSST going through the cabinets of the units and no unions on the gas lines.

  8. #34
    Join Date
    May 2007
    Location
    Dry as a bone Tucson
    Posts
    4,342
    Some Talk, Some Do
    "keeping condensing pressures low and evaporator pressures high"
    "Some customers are more interested in comfort than energy savings"
    Blog
    Web
    Facebook


  9. #35
    Join Date
    May 2012
    Location
    Upper Michigan
    Posts
    3,588
    Someone stepped back in time lol

  10. #36
    Join Date
    Dec 2008
    Location
    NW Iowa
    Posts
    125
    Quote Originally Posted by coolwhip View Post
    They look too close together. Seperate disconnects would be nice too.


    Did you know those are Goodman units?
    I think that is a outdoor panel, with seperate disconnects.

  11. #37
    Join Date
    Dec 2005
    Location
    Cincinnati, Oh
    Posts
    5,042
    Quote Originally Posted by Joehvac25 View Post
    Someone stepped back in time lol
    probably wanting to see how many motors he replaced in 5 years.

    4 units x 5 years = roughly 10?
    lol
    "Better tell the sandman to stay away, because we're gonna be workin on this one all night."

    "Dude, you need more than 2 wires to a condenser to run a 2 stage heatpump."

    "Just get it done son."

    Dad adjusted

  12. #38
    Join Date
    May 2006
    Location
    Northern California
    Posts
    70
    Funny to see people callin Goodman crap, anything installed proper will run right. I dont deal Goodman but I see alot of the Lennox guys installing them in order to get bids, they just lower the bid by 1k.

  13. #39
    Join Date
    May 2007
    Location
    Dry as a bone Tucson
    Posts
    4,342
    Quote Originally Posted by Joehvac25 View Post
    Someone stepped back in time lol
    Yes I did. I have 2 jobs that require twinning on common duct systems. One has a common supply with variable speed motors and the other has PSC motors with a common return. H-Talk is full of knowledgeable and experienced HVAC people that dont mind sharing their wisdow. So when I want to do my homework I have found the search tool to be extremely valuable.
    Some Talk, Some Do
    "keeping condensing pressures low and evaporator pressures high"
    "Some customers are more interested in comfort than energy savings"
    Blog
    Web
    Facebook


Page 3 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event