I'm not a controls guy, and I'm not very computer literate, but maybe this will get you started while waiting for the guys that are. On your Summit workstation (computer), while looking at the Summit screen (any screen), at the top where it says things like "File, Connect, Status,.... Help", left click on "Help", then left click on "Help Topics" and you will see the software version of the Manual for Summit. Also you might try contacting your local Trane Commercial Sales office. They may have locally based Operator level classes to help you get started. Try asking them for any type of help they may be willing to give. I lurk on the Controls forum here and have learned things, including that some experienced and knowledgeable and helpful guys come here to share. I believe you've taken a good first step in coming here. I have Summit here and was only able to give the advice above by reviewing it a few times while typing it.