York YS Service Manuals.

[Cadrion]

Hi guys, I've been working to get a database on York manuals going and so far I've done well with manuals reguarding parts lists, control panel info, ioms. The past week I've been working on a York YS Design A repairing leaks, charging, and now some more troubleshooting. This chiller has been neglected badly. Anyway, from what I can tell there are at least 2 service manuals 160.47-M1 and 160.47-M2. Does anyone have these manuals to share? I have to follow up with some more work- slide valve pot is bad, chilled water sensors are off a few degrees. It's a shame that some owners let their equipment go fo so long then when they have to make that final repair they find out just how much has gone wrong with it. For me, I love it though. hah. Thanks in advance.

[crymtide]

Hi guys, I've been working to get a database on York manuals going and so far I've done well with manuals reguarding parts lists, control panel info, ioms. The past week I've been working on a York YS Design A repairing leaks, charging, and now some more troubleshooting. This chiller has been neglected badly. Anyway, from what I can tell there are at least 2 service manuals 160.47-M1 and 160.47-M2. Does anyone have these manuals to share? I have to follow up with some more work- slide valve pot is bad, chilled water sensors are off a few degrees. It's a shame that some owners let their equipment go fo so long then when they have to make that final repair they find out just how much has gone wrong with it. For me, I love it though. hah. Thanks in advance.

The owner attitude of if I ignore them they'll run forever!

[Cadrion]

More directly, I'm trying to find out the slide valve ot calibration proceedure f there is one.

[servicetrane]

I send you hope these pages will be helpful

[Legacy80]

did you get what you need? i have a few, not the same form numbers but they are the ys style a manuals, parts, o&m, service, installation.

[zw17]

Get your pro status. I will not give out manuals to regular guests.

Lots of info in the pro forums.

[Cadrion]

Thank you ServiceTrane, that is what I was looking for. Hopefully, I can track down the full manual. I appreciate the help.

Zw17- I am working on it. Gotta get some more posts in.

All- thank you..

[Cadrion]

Thanks all for the help, calibration went well and the chiller is running better than it has in a long time. In the end, I did find the 160.47-M2 and all the service bullitens for it.