Is it wired up right?
I changed out a burn out fan motor on the condensor and put a new 7.5 cap. as the motor required. It worked fine for a week or so... now the fan when it starts up goes back and forth and about half the time runs backwards. I reversed the leads, changed the cap just in case it was a bad one. Any suggestions......
Is it wired up right?
it worked for a week without issue...
had another go bad on another house .... same fan motor... wired up without issue and still running
two leads to the relay
2 leads to the cap.
jmo90280, this is the Ask Our Pro's forum, and only Pro members that have been vetted by the AOPC may post advise here. Please apply to the AOPC today, thank you.
You can find the rules for posting and qualifications here.
Further infractions may result in loss of posting privileges.
BradMahoney
This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread.
You can find the rules for posting and qualifications here.
Additional infractions may result in loss of posting privileges.
Your post has been deleted.