Picard Bowl lift
Results 1 to 7 of 7

Hybrid View

  1. #1
    Join Date
    Sep 2011
    Location
    California
    Posts
    12

    Picard Bowl lift

    Anyone had work on this type of equipment.
    Mod LP-2800BL Ser. 1190980
    220-240V charger. 12VDC system.
    Having problems with the Tilt return. The tilt down is no problem.

  2. #2
    Join Date
    Feb 2010
    Location
    NE Alabama
    Posts
    301
    Limit switch maybe

  3. #3
    Join Date
    Sep 2011
    Location
    Maryland
    Posts
    38
    How does it tilt? Is it a toggle switch? We work on a lot of savage Bros. bowl lifts and this switch goes out over time.

  4. #4
    Join Date
    Sep 2011
    Location
    California
    Posts
    12
    Yes, I replaced them with a selector switch with a spring return.

  5. #5
    Join Date
    Sep 2011
    Location
    California
    Posts
    12

  6. #6
    Join Date
    Sep 2011
    Location
    Maryland
    Posts
    38
    That works a little different then Savage Bros. in that the Picard is using a relay to reverse the direction. Is it possible that the gearbox is causing a binding on tilting back up?

  7. #7
    Join Date
    Sep 2011
    Location
    California
    Posts
    12
    Quote Originally Posted by Ovenguy View Post
    That works a little different then Savage Bros. in that the Picard is using a relay to reverse the direction. Is it possible that the gearbox is causing a binding on tilting back up?
    I added a diode this way i would not make a short circuit. When i changed the direction of the motor.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event