Does anyone know were to get a good O&M
on this chiller
I have the 220 page Optiview but it doesn't
do the trick
I am looking for the factory charge for this machine
its not on the nameplate
You want FORM 160.73-O2 (605) available on JCI's website. You didn't write the number for the compressor code. I'm assuming it's a Q7. With C-C shells it should have a charge of 1,600 lbs.
My compressor Model Number is
I have a leak on the oil return line service valve on the back of the oil sump. Its threaded into a female pipe fitting and it doesn't show a o-ring or gasket on the parts list. Do you know if its leak tight on the threads?
Its the line coming from the bottom of the cooler barrel with the filter dier and solinoid valve and then into the sump
No leak tight! All fittings on YKs should either have teflon seals or o-rings. Check out this parts list and see if you can identify the fitting you are seeking.
Originally Posted by spencer91