Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2012
    Posts
    63

    Controls to commercial

    Ok guys i done with controls and going into commercial (package units) and such. So now i need to know what what tools i should get i have basic hand tools, gauges and meter. now just need to know socket and wrench sizes and anything else. Thanks

  2. #2
    a complete set of ratcheting wrench's always seem to be handy. Along with a good 5/16 and 3/8 driver. If your working on Trane get a good roto lock wrench

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event